{{ $t('shop.all.spaetbestellservice.hinweis') }}
Valve function | 3-way proportional flow control valve |
Construction set up |
Piston pusher, With Integrated pressure sensors |
Control type | Direct |
Actuation type | Electrical |
Reset mode | Spring magnetic |
Flow direction | Not reversible |
installation position | arbitrary |
Sealing principle | Hard |
Nominal width [mm] | 6 |
Short circuit resistance | yes |
Display type | LED |
Flow measurement range [l/min] | 0 to 1500 |
Operating pressure [bar] | 1 to 10 |
Flow control range [l/min] | 30 to 1500 |
Information about flow control range |
Control is done from 30 l/min, below this target value the flow control valve is switched to the venting position, Specified precision details refer to the flow control range from 75-1500 l/min |
Repeatability in ± %FS [%FS] | 0,5 |
Absolute precision in ± %FS at room temperature [%FS] | 3 |
Hysteresis FS [%FS] | 0,8 |
ambient temperature [°C] | 0 to 50 |
Medium temperature [°C] | 15 to 35 |
Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
Information about operating and control medium |
Oiled operation not possible, Maximum particle size 5 µm |
Protection category | IP65 |
Information about protection category | In mounted condition |
Permission | RCM mark |
CE certificate (see declaration of conformity) |
to EU EMC directive, to EU EX protection directive (ATEX) |
ATEX gas category | II 3G |
ATEX dust category | II 3D |
Ex ignition protection type gas | Ex nA IIC T5 X Gc |
Ex ignition protection type dust | Ex tc IIIC T60°C X Dc |
Ex ambient temperature | 0°C <= Ta <= +50°C |
Material information | RoHs compliant |
Oscillation strength | Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
Shock resistance | Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27 |
Corrosion resistant class KBK | 1 - low corrosion stress |
Nominal operating voltage DC [V] | 24 |
Operating voltage range DC [V] | 20.4 to 30 |
residual ripple | 5 % |
Max. power input [A] | 1,2 |
Power input for unloaded outputs [mA] | 150 |
Control output | PNP |
Control input | PNP |
Current carrying capacity per output [mA] | 100 |
Reverse polarity protection | for operating voltage |
Power-on time | 100 % |
Max. electrical power consumption [W] | 36 |
Signal range analogue output | 4 - 20 mA |
Signal range analogue input | 4 - 20 mA |
Diagnose function | Display via LED |
Electrical connection |
M12x1, 8 pin, Plug, A-coded |
Fastening type |
Direct fastening via throughway bores, Direct fastening via thread |
Pneumatic connection 1 | G3/8 |
Pneumatic connection 2 | G3/8 |
Pneumatic connection 3 | G3/8 |
Product weight [g] | 856 |
Housing material | Aluminium wrought alloy, anodised |
Seals material |
FPM, HNBR |
{{ $t('shop.all.gewicht') }} | 856 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.